Quality approvals

Meggitt SA has an integrated quality, environment, health and safety (QEHS) policy that serves as a guideline for everything we undertake. Everyone at Meggitt SA is responsible for developing, maintaining and continuously improving the quality and safety of our products and processes – to be right first time, every time.

Our QEHS policy expresses our objectives to:

  1. Recognise product safety, environment, health & occupational safety as first priorities in all our activities
  2. Be accountable to our customers and stakeholders
  3. Report all identified errors and/or incidents openly
  4. Develop and maintain energy efficient and environmentally friendly products, minimise/dispose of waste and minimise the impact of our operations on the environment
  5. Support and enforce the management of safety
  6. Ensure availability of sufficient skilled and trained personnel
  7. Comply fully with all regulatory and standards requirements
  8. Foster a safety conscious and continuous improvement culture.

Supported by our QEHS policy, we continually strive to exceed customer expectations through our business management system. As a result, Meggitt SA is recognised industry-wide for these efforts with many certificates and approvals, including the following:

 

Quality, environment, health and safety (QEHS) certificates

AuthorityDocumentReference
AFNORISO 9001 certificate2017/76896.1
AFNORAS9100 certificate2017/76895.1
Bureau VeritasISO 14001 certificate (English)
ISO 14001 certificate (French)
CH8644082
NadcapElectronics certificate5249175785

 

Quality, environment, health and safety (QEHS) policy

AuthorityDocumentReference
Meggitt Sensing SystemsQuality, environment, health and safety policy (English)
Quality, environment, health and safety policy - simplified (English)
Q-EHS policy
Meggitt Sensing SystemsQuality, environment, health and safety policy (French)
Quality, environment, health and safety policy - simplified (French)
Politique Q-EHS
Meggitt Sensing SystemsQuality, environment, health and safety policy (German)
Quality, environment, health and safety policy - simplified (German)
Q-EHS Politik

End-of-life product disposal

For end-of-life product disposal information and guidance, email our Environment, health and safety department at ehs@ch.meggitt.com, call us on +41 26 407 11 11 or find your local contact.

 

Ex product production notification and register

AuthorityDocumentReference
LCIEProduction quality assurance notification for equipment and protective systems intended for use in potentially explosive atmospheresLCIE 03 ATEX Q 8001
Meggitt Sensing SystemsEx products registerPL-1511

 

SIL product certifications

AuthorityDocumentReference
TÜV NORDVM600 machinery protection system safety certificateSEBS-A.110353/16 V1.0

 

Regulatory approval certificates

AuthorityDocumentReference
Russian federal agency for technical regulation and metrology (Rosstandart)CA and CE accelerometers pattern approval certificateCH.C.28.004.A N° 59463
Russian federal agency for technical regulation and metrology (Rosstandart)CV and VE velocity sensors pattern approval certificateCH.C.28.004.A N° 59021
Russian federal agency for technical regulation and metrology (Rosstandart)CP dynamic pressure sensors pattern approval certificateCH.C.30.001.A N° 60183
Russian federal agency for technical regulation and metrology (Rosstandart)TQ proximity sensors pattern approval certificateCH.C.28.004.A N° 58976
Russian federal agency for technical regulation and metrology (Rosstandart)LS air-gap sensors pattern approval certificateCH.C.27.004.A N° 58509
Russian federal agency for technical regulation and metrology (Rosstandart)VM600 and VibroSmart systems pattern approval certificateCH.C.28.004.A N° 60224

 

Supplier quality requirements

AuthorityDocumentReference
MeggittSupplier quality requirementsMPRC-10
Meggitt Sensing SystemsSupplier quality requirements and supplemental purchase order conditionsSPOC revision 4
Meggitt Sensing SystemsSupplier concession requestMSS-CH-FO-106
Meggitt Sensing SystemsSupplier root cause analysis – 8D reportMSS-CH-FO-120